Supertime Technical Department
Jinan Supertime Technology Co.,Ltd offers you profitable CNC angle line of various models, according to different angle sizes, combines advantages of high processing efficiency and accuracy.
Here are complete technical parameters and features of CNC angle drilling.
Angle size:
CNC angle drilling machines also has marking function.
Angle size140×140×10～250×250×32mm,
maximum drilling diameter is φ26mm,
angle size deviation and bending degree meet standard GB9787-88.
Marking Unit:
Maximum marking force is 1250KN
Angle size: 200x200mm, marking distance: 105mm
Angle size: 160x160mm, marking distance: 65-105mm
Angle size: 140x140mm, marking distance: 35-90mm
Letter size due to requirements, letter group length no more than 180mm, letter length all should be 19mm.
Drilling unit:
3 drilling heads on either side
Spindle max. Rotation speed 6000rpm
Drilling diameterφ17.5～φ26mm
Distance range 50-220mm
Infeeding part workpiece max length 12m
Outfeeding part workpiece max length 12m
Hydraulic system:
Motor power is 11KW
Pressure is 5.5Mpa
Oil tank capacity is 400L
Water-oil heat exchanger for cooling
Pneumatic system:
Pressure max is 1Mpa, min is 0.3Mpa, cooling system power min is 0.6Mpa
PU connection pipe (φ12mm)
N46 Wear resistant hydraulic oil.
380L, 3 barrels（170kg/barrel）oil for normal working
High pressure working pressure 20～22Mpa,
Low pressure working pressure 5～6Mpa
Electrical System:
Three-phase electricity
Pressure is 380V
Frequency is 50HZ
Total power is 110KW
More info:
Jinan Supertime Technology Co.,Ltd
CNC machine design & manufacture specialist
没有评论:
发表评论