Supertime Technical
Department
CNC angle line is
a popular equipment widely used in power transmission, bridge, railway,
construction etc, for angle punching/drilling, marking and shearing.
Take JX0808
designed by Jinan Supertime Technology Co.,Ltd for
example, can process angle 30x30x3-75x75x8mm. This CNC angle punching, marking
and shearing machine has advantages of high efficiency and accuracy in
comparison with traditional angle processing machines.
Video:
On the other side,
this angle production line is relatively complex, how to install it?
Installation and Inspection
1. Install material table and feeding parts according to
foundation drawing.
2. Infeeding, mainframe and outfeeding parts should be in
line with marking, punching and shearing units, deviation less than μ1.5mm, angle material should go smoothly on
rollers and avoid unbalance loading.
3. Connect pipeline and electrical circuit according to
general drawing, main parts assembling drawing, hydraulic, pneumatic and
electrical drawings.
4. Clean oil tank, add filtered oil, oil quantity no less
than indicated oil position, otherwise causes system overheat and oil pump
suction, lead to machine breakdown.
5. Before start oil bump motor, close completely cut-off
valve, then loose and rotate pressure regulating handle on all overflow valves.
6. Turn on electricity and start motor, and start motor
when rotation direction is the same with
oil bump rotation direction, makes oil bump empty load operate.
7. Add lubrication oil before start CNC angle line
equipment.
8. Check all stroke switches before start CNC angle line
equipment.
9. Load test, check firstly workpiece procedure, start
motor after conformation, test with small size angle, then with larger size
angle when machine runs well. Regulate safety overflow valve from 6MPa, to
5.5MPa and 5MPa. High pressure electromagnetic relief valve can be regulated to
20-23MPa, maximum 25MPa.
10. Regulate punching die position, elevate shearing unit
and safety bar before change punching die.
11. Change down knife when regulate cutting-knife
interval. Thicker angle, thinner knife.
More
after-sale service or maintenance problems, pls contact us!
Tags:
cnc
angle line, cnc machine, cnc operation, cnc manufacture.
没有评论:
发表评论